(250EH1-15)
Rebates:
- VEECs = -$480.00
- STCs = -$500.00
- Solar Victoria = -$1,000.00
7-year* replacement warranty offered on tank failure
5-year warranty on compressor
2-year warranty on electronics
Produced by the world’s largest appliance manufacturer
Save up to 71% off hot water running costs
Envirosun is a 100% Australian owned company
Produced by the world’s largest appliance manufacturer (manufacturers of Haier, General Electric and Fisher & Paykel brands) this heat pump hot water system was initially introduced into Europe over a decade ago and has proven a great, reliable performer, even in temperatures as low as -7°C. When you bring that to our warmer environment the efficiency and heating recovery time ability increases dramatically.
It offers the best performance of any system in its class with up to a massive 71% saving in energy when compared to a conventional electric and LPG gas water heaters.
A Boost feature is also added for rapid heating when you have extra people in your home, so you will never go without hot water.
The Envirosun system has undergone rigorous testing and has been certified by the Australian Government Clean Energy Regulator and attracts a higher STC rating than most other brands of heat pumps in the Australian hot water market.
All Envirosun hot water tanks are also protected by not one, but two sacrificial anodes for a longer storage tank life.
The combination of whisper quiet operation, smart controls, superior UV protection and generous government rebates makes Envirosun the natural choice for an energy efficient home.
How It Works
Envirosun heat pump technology makes efficient use of heat in the surrounding air, even at temperatures as low as -7°C. In fact the Envirosun heat pump hot water system is so efficient that it can convert 1kW of electricity into over 4kW of heat.
-
The fan draws in the air containing heat energy, across an evaporator.
-
The evaporator turns the liquid refrigerant into gas.
-
The Envirosun compressor pressurises the refrigerant liquid into hot gas.
-
The hot gas inside the condenser coil heats the water inside the tank.
-
The refrigerant reverts back to a liquid after expansion & continues back to the evaporator for the process to start all over again.
| Model | 250ES1-15 |
|---|---|
| Tank volume | 246L |
| Rated voltage/frequency | 220V~240V/50Hz |
| Tank rated pressure | 0.7MPa |
| Corrosion protection | Magnesium rod |
| Insulation Protection Rating | IPX4 |
| Type of system | Monobloc air source heat pump |
| COP @ 7°C | 3.02 |
| COP @ 15°C | 3.41 |
| Tapping cycle | L |
| Auxiliary heating element | 1500W |
| Rated power input by heat pump | 495W |
| Maximum power input by heat pump | 865W |
| Maximum power input | 1500W |
| Standby power input/Pes | 35W |
| Heating up time (7°C) | 7.35h |
| Heating up time (15°C) | 6.17h |
| Default temperature setting | 65°C |
| Temperature setting range - with heater | 35°C – 75°C |
| Max. working pressure of refrigerant | 0.8/2.8MPa |
| Refrigerant type/weight | R134a/0.9kg |
| Sound pressure level | 46dBA |
| ASTC Zone | Zone 1 – 5 |
| Ambient temp. operating range of heat pump | -7 – 45°C |
| Water inlet and outlet connection | G3/4"F |
| Safety valve connection | G3/4"F |
| Drain & Water inlet connection | G3/4"F |
| Product Dimensions (mm) | 600 x 629 x 1987 |
| Packing dimension without pallet (mm) | 736 x 695 x 2120 |
| Packing dimension with pallet (mm) | 736 x 695 x 2250 |
| Net/Gross weight | 102/115kg |
Get a quote
